具有放大信号的力传感器轭适用于广泛的应用。
使用 M2 螺钉穿过其中心孔将其固定在表面上。 测量轭的位移必须受到机械限制。
Measuring principle Thin film strain gauges
Measuring parameter Force (N) or displacement (μm)
Electrical contacting * Solder points, stranded wires
or cable (3-wire)
Mounting Attach with M2 screw through
central hole, amplifier on bottom
Application of force On measuring yoke with reproducible
point of application
Overload protection Mechanically limit
displacement of yoke
Direction of force * Perpendicular onto back side
(without components) of sensor
Supply voltage 12 V to 28 V (supply of strain
gauge is stabilized to 9 V)
Signal * Amplified by instrumentation amplifier
(factor of 250 to 1300, as needed), 0.2 V to 9 V
Shielding * Substrate is connected to supply ground
Temperature range * –20 °C to +80 °C
Humidity range up to 95% RH, non-condensing
本公司并非SENSTECH官方代理商